PERFORMANCE DOUBLE WING

The Performance Double wings are a classic, perfectly sized donut to fit a standard double tank configuration and no wider angle when the wing is empty. This allows air to pass easily from one side to the other for complete streamlining, trim and buoyancy control. It has a single inflator with a corrugated tube connected to a non-detachable elbow fitting fixed in the upper rear center position. The discharge and overpressure valve are located behind the left side. The edges are reinforced with a second ring of material to eliminate any wear or tear at the exposed point.

Features:

weight: 1.34 kg,
material: Cordura, polyurethane material of the inner bladder,
lifting capacity: 20 kg (45 lbs) or 27.1 kg (60 lbs),
colors: black, gray / black, orange / black, green / black, blue / black, pink / black, red / black, yellow / black,
type: wing for two cylinders,
inflation tube top middle,
attached low-pressure inflation hose,
ultrasonically welded fittings and seams,
inner lining with zipper,
inner urethane lining protects against abrasions and punctures,
drain valve lower left,
1000 denier nylon outer bag.